Versa 2a tracker

Versa2a tracker
versa-2a-liggend
versa-2a-mount

Versa 2a tracker

The Versa 2a tracker provides you with real-time visibility into the location and condition of your goods and assets. It contains sensors that measure the temperature, humidity, exposure to light and register tilting and shocks. You get notified the moment a deviation occurs, like a breach in temperature or when the shipment has been dropped. The Versa 2a tracker can also act as a gateway for item-level monitoring in combination with Versa tags and any other Bluetooth tags or labels.

Product specs

Dimensions

140 x 80 x 26 mm
5.51 x 3.15 x 1.02 inches
Weight: 190 grams / 6.70 ounces

Enclosure: polycarbonate
Front and back cover: matte black (customizable)
Middle ring: black (customizable)

Power and battery

Built-in rechargeable lithium- polymer battery
101 x 52 x 11 mm
3.96 x 2.03 x 0.41 inches
124 grams / 4.37 ounces
Nominal voltage: 3.7 V
Watt-hour rating: 18.5 Wh
Capacity: 5.000 mAh

Communication options

LTE: Cat M1/Cat NB2/ EGPRS
GSM/EDGE: 850/900/1800/1900 MHz
GNSS: GPS/GLONASS/ BeiDou/Galileo/QZS
LoRa, Wi-Fi, Bluetooth Low Energy, ADS-B

Flight mode

The Versa 2a tracker features a patented automatic flight mode, compliant with EASA, FAA and IATA regulations. The device goes into flight mode as soon as the doors of the aircraft close. However, should this fail, the accelerometer and pressure sensor will force flight mode during take off. The device wakes up automatically when the plane arrives at the airport.

Vessel mode

The tracker also contains a unique vessel mode to ensure that the tracker goes into sleep mode during ocean or river transport. However, if something happens that requires action, like the temperature exceeding the allowed maximum, the exception will be transmitted using the available communication network. The tracker can use Bluetooth to inform the ship’s crew so they can act on it immediately.

Robust industrial housing

IP 66

Easy to use

The tracker does not have an on/off switch. Instead, it is activated by motion. You never have to worry about turning the tracker on or off.

Easy to install

There are several ways to attach the tracker to your shipment. The tracker comes with a mount which you can attach to a container with screws. There is also a hole in the top right corner of the tracker to attach it to an asset using a tie wrap.

Certifications

FCC, ISED and CE: scheduled for Q1 2022

Operating temperature

-35oC to +60oC

Sensors

Temperature
Operating temperature: -40 oC to +85oC
Accuracy: ±0.5oC

Humidity

RH Operating range: 0 – 100% RH
T Operating range: -40oC to +125oC

Light

Measurement Levels: 1.2 nW/cm2 to 10 mW/cm2

Motion

Three axes
Acceleration range: ±2.0g, ±4.0g, ±8.0g, ±16.0g
Angular rate range: ±125/±250/±500/±1000/ ±2000 dps